While using any gadget it is common to encounter bugs or system glitches and from one of them, the most common error is Bad System Config Info Error which happens due to malfunctioning of the system and for error in Registry files or BCD files. While using the system, encountering such an error can make you irritated but here we have come up with its solutions.

How to Fix Bad System Config Info Error in Windows 10

If you are facing this problem of Bad System Config Info Error in Windows 10, don’t worry as there are some ways out. Some of the reasons behind encountering this error are:

• Faults in hardware.
• Improper system Configurations.
• Backdated Driver.

This error can be solved easily and in this article, we are presenting some tested and verified Solution which can give a permanent solution to Bad System Config Info Error in Windows 10.

Method 1: Check your RAM & Hard Drive

Sometimes, RAM and Hard Drive can be the reason for encountering this error. Errors in fittings of RAM and Hard Drive can lead to this error. If you are comfortable and confident enough to open up your system then only check your PC’s inside to ensure that the RAM is fitted properly into its slot. Along with this make sure that the SATA cables of your Hard drive are connected properly. This will take hardly some minutes. If you are not comfortable to check you can take the help of others or the Internet also!

If they are correctly fitted to the system then you need to check the health of the Hard drive and the health of RAM. After checking if you get bad results errors then you may need to replace the relevant component i.e Hard drive or RAM.

Method 2: Update or Reinstall Drivers

Outdated and incompatible drivers can lead to many problems and the bad system config info error is another. Bad drivers can

conclude in BSoD errors from which this error is another one. For this :

1. Navigate to the “Windows Device Manager” and for this, you need to press the “win key” from your keyboard and then type “device manager” there and hit the enter button from the keyboard.
2. In the Windows device manager, window click on the option labeled “action”.
3. Under the “action” category opt for the “scan for hardware changes” option and carefully watch if any yellow exclamation mark symbol appears beside any device. For this, you need to click on the drop-down icon to see if it is appearing or not.
4. After finding, then hit a right-click on them and click on the “Update derive”.
5. Here, if the problem continues, hit a right-click on the driver and select ” Uninstall device”.
6. After that, if that is a system device then the system will reinstall them automatically after rebooting your PC. But if that is a third-party driver, it will reinstall once it gets reconnected with the device.

Now check if the problem persists or not.

Method 3: bcdedit command

Improper system Configurations or incorrect system Configurations can lead to this error in Windows 10. This error can appear when it doesn’t get access to Windows 10 and this may occur due to the wrong value present in the configuration file of memory and processor ls. To overcome this problem you can follow these steps :

1. Navigate to the start menu.
2. Click on the Power option from the menu list.
3. Click on the Restart option while pressing and holding the Shift button together.
4. On the screen and under the category “choose an option” select “Troubleshoot”.
5. In the “Troubleshoot” Window click on the option “Advanced Option”.
6. From the current window opt for the option “Command Prompt”.
7. Now your system will restart and it will display the blue screen containing the command prompt. There you need to select an account to continue followed by clicking the enter button. Now for that account, you need to enter your password.
8. Now in the command prompt start entering those commands one by one:

bcdedit/deletevalue {default} numproc

bcdedit/deletevalue {default} truncatememory

9. Now close the command prompt.
10. Now give a restart to your system and check if the problem persists.

Method 4: Fix BCD file

Improper or corrupted or damaged Boot Configuration Data Or BCD file can trigger this error. Due to such inconvenience in the BCD file this error triggers and for which it denies you access to safe mode and Windows 10 together. Well to overcome this problem you need a Windows 10 installation DVD or Bootable USB Flash drive along with Windows 10. Well if you don’t have the Bootable USB Flash drive nothing to worry about. You can use the Media Creation Tool instead of this. To perform this method follow the steps :

1. First, you need to bring your Bootable Windows 10 installation DVD and insert it in the slot. Now boot from it.
2. After that Windows 10 setup will start.
3. Now you need to click on the next option.
4. Now in the current window opt for the option “repair your computer” and click on it.
5. Then choose the option “Troubleshooting” and under this category select “Advanced option”. You will then find “Command Prompt” under “Advanced Option”.
6. Now in the command box, you need to type all the commands there and hit the Enter button after each command. In this step, the last command you will enter, it will delete and recreate Master Boot Records. So it is recommended to be careful while using it. They are :

bootrec /repairbcd

bootrec /osscan

bootrec /repairmbr

7. Once they are done, close the Command Prompt.
8. Now give a restart to your system and check if still, the error is appearing or not.

Method 5: Fix the Registry

Problems with a specific registry can trigger this error. These Registry issues can be overcome by the following steps.

1. First, you need to boot from the installation DVD of Windows 10.
2. Under the “Troubleshoot” category opt for “Advanced Option” and then choose “Command Prompt”.
3. When the “Command Prompt” will start, type the following commands. After each command you need to press “Enter” and this will rename that command. After completion Windows 10 will not use them again. Even they can be deleted.

cd C:\Windows\System32\config

ren C:\Windows\System32\config\DEFAULT DEFAULT.old

ren C:\Windows\System32\config\SAM SAM.old

ren C:\Windows\System32\config\SECURITY SECURITY.old

ren C:\Windows\System32\config\SOFTWARE SOFTWARE.old

ren C:\Windows\System32\config\SYSTEM SYSTEM.old

4. Now you need to copy the registry’s backup followed by replacing old files. For this enter the following commands in the command prompt :

copy C:\Windows\System32\config\RegBack\DEFAULT C:\Windows\System32\config\

copy C:\Windows\System32\config\RegBack\DEFAULT C:\Windows\System32\config\

copy C:\Windows\System32\config\RegBack\SAM C:\Windows\System32\config\

copy C:\Windows\System32\config\RegBack\SECURITY C:\Windows\System32\config\

copy C:\Windows\System32\config\RegBack\SYSTEM C:\Windows\System32\config\

copy C:\Windows\System32\config\RegBack\SOFTWARE C:\Windows\System32\config\

5. Once you are done with this process close the command prompt and give a restart to your system.

Method 6: System Restore

If the above-mentioned methods don’t work and before going for the terminal solution you should try this one also. It has been reported that this solution helped many users :

1. Navigate to the “Start” menu.
2. From there click on the “Power” option
3. Hit the “Restart” option by pressing and holding the “Shift” button simultaneously.
4. Opt for the “Troubleshoot” option and from there select “Advanced Option” . Under this category select “System Restore”.
5. Now you need to select your username.
6. Go with the on-screen prompts.
7. Go for the Restore point you desire.
8. Press the Next option and wait till the process ends.

Method 7: Reset Windows 10

If you’ve tried all of the above mentioned methods and all went in vain then only go for this method. This is the terminal solution. Before going for this process don’t forget to make a backup of your all data because your all data will be deleted for this resetting process from the C drive.

1. Click on the “Start” option first.
2. From the Start Menu click on the Power option.
3. Now click on the “Restart” option while pressing and holding the “Shift” button simultaneously.
4. From the current window, under the category Troubleshoot, opt for the option “Reset this PC”.
5. Choose “Remove everything” on that drive where Windows is installed.
6. Now click on the Reset option and wait until the process gets over. After resetting you will encounter a fresh Windows 10 installed in your system.

Conclusion

Facing errors like Bad System Config Info Error in Windows 10 is very common and for getting better results it is recommended to apply them according to the order. Try to go for resetting Windows once you are done with all prior methods. Hope you find this article helpful & don’t forget to share which method worked for you. Good luck!

While updating Windows many users face this 0x80070002 error of Windows Update in your PC or laptop. But there is nothing to worry about as it is one of those common errors in Windows. This error can be displayed as 0x80070002 or 80070003 also on the basis of the Windows version. But for them, fixes are more or less the same for all Windows versions.

Causes of Error Code 0x80070002

When some files in Windows Update are missing or corrupted and there’s a fault in the driver, then this error can occur. This can happen even after downloading and extraction though this code may vary with Windows versions. For XP it will show 0x80070002 while for Windows 10 /8/7 it will show 80070002.

How to Solve Windows Update Error 0x80070002 in Windows 10

Encountering Windows Update 0x80070002 error is a common error and people have reported to solve them easily. If you are encountering such codes in respective Windows don’t panic here you will find some tested and most rated solutions for this. For a better and quick response, it is highly recommended to follow the sequence properly.

Method 1: Check the Date and Time settings

0x80070002 error can be displayed when the date and time of your computer time is different from each other. This may sound a bit odd but many Windows users have been reported about this reason and if you are facing this 0x80070002 error then do have a check at your date and time once whether it is up to date or not to update your date and time you can follow these steps:

If you are using Windows 7 or Windows 8 then you can follow these steps. For Windows 7/8 Users –

1. Go to the bottom right side and click on the Date and Time option and go to the Change Date and Time Settings.
2. On the option change date and time and ensure that Date and Time is up to date and click on the ok button.
3. Check your time zone as well to ensure that you are getting the correct time zone.
4. Now go to the internet time option and select Change Settings.
5. Here you need to ensure that the checkbox for Synchronize with an Internet time server is marked and then click on Update Now.
6. Now click on the Ok button to save the changes you have made.
7. Now restart your computer and check if it gets solved.

Well if you are Windows 10 user then you need to follow these steps and for Windows 10 users –

1. Navigate to the search box and type cmd there and hit the enter button. Then click on the command prompt to run it as administrator followed by clicking yes
2. In the current window type w32tm/resync, date and time and hit the Enter button after each command.
3. After completion of commands restart your system and check for that error is it is appearing

If still, you are encountering this error then keep calm and scroll down to get other methods.

Method 2: Modify the Windows Update Installation Files

When the system update process fails and Windows Update Installation files get corrupted or missing then this 0x80070002 error can trigger. Many users faced this problem and it can be fixed easily even by deleting or renaming installation folders. But before heading towards this you need to restrict Windows Update Service or else you will not be able to modify the files or folder if they are open in programs. To perform this method you can follow these steps:

Disable the Windows Update service

To restrict Windows Update Service you need to disable the Windows Update service first and for this :

1. Press Windows key and R together on your keyboard to open the run dialog box.
2. In the opened run dialog box you need to type services.msc and hit the enter key from your keyboard.
3. Now if you are using Windows 10 then give a double click to Windows Update and if you are using any Windows XP then double click on the option Automatic Updates.
4. Now in the opened window go to Startup type and change it to Automatic and under the service status category you will find some options and click on the start from them. Now to save the changes click on apply and ok respectively.
5. Now restart your PC and check for Windows Update if it works.

Delete the Software Distribution Folder

In this step, you need to delete the file/folder which is corrupted or missing. For this:

1. You need to go to the drive where your Windows is installed (generally C drive) and hit a double click on it.
2. Now to go folders and from there go to Windows. In the Windows folder, you will find another folder named SoftwareDistribution.
3. You need to delete this folder named SoftwareDistribution ( if you have any administrator password then it will prompt for your password and there in the given area you need to enter your password as a confirmation step)

In this case, if you are not willing to delete this SoftwareDistribution folder, then you can rename this folder as SoftwareDistributionOld.

4. After deletion or rename close all the panels.

Re-enable the Windows Update service

For this step you need to:

1. Press the Windows key and R together to open the Run box.
2. There you need to type services.msc and press enter.
3. For Windows 10 give a right-click on Windows Update and for Windows XP give a right-click on Automatic Updates and click on the start option there.
4. Once it is done restart your computer and try to Update Windows again and check if you encounter this error.

Method 3: Try Windows Update Troubleshooter

Windows Update Troubleshooter will always help you whenever you are in trouble with Windows Update. It is one of the most convincing methods. If all the above-mentioned methods failed then you can use this method. Here Windows Update Troubleshooter helps to resolve problems while Installing and downloading Windows Updates. To perform this method, you can follow these steps :

1. For this, you need to download Microsoft Troubleshooter from Microsoft and ensure to have a safe download.
2. After downloading, you need to run the file.
3. Now click on the Windows Update title and click on the next option.
4. Then it will automatically run to try to fix the problem. After the entire procedure, give a restart to your computer and try for Windows Update and observe if the error persists or not.

If still, you are facing this error, then scroll down to get the next Method.

Method 4: Modify Registry Editor

While Installing Windows upgrade, you can encounter errors like 0x80070002 on Windows. But it also has a way out, and particularly in this case, you can apply this method to get rid of this error. For this you need to :

1. Before heading for this method, you need to ensure that language is set to English (United States) and Windows Media Creation Tool is running as administrator.
2. Now hit a right-click on this and choose Run as administrator.
3. From your keyboard press, the Windows key and R together to open the run dialog box.
4. In the run dialog box type regedit and hit enter from the keyboard. Then if required, give the administrative right to open and to confirm click on Yes.
5. Now from there, you need to navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade.
6. Now opt for the OSUpgrade key followed by giving a right-click on the empty area of the Registry Editor on the right pane. Click on the button New, and from the list, select DWORD (32-bit) Value.
7. In the current window, you need to set the value name to AllowOSUpgradeand only after that setting you can double click the number under the value data category and can enter 1. Then you need to select the base to Hexadecimal, and to save the changes, click on OK.
8. Now restart your computer and check if this problem is solved or if it is still there!

Conclusion

Those are the most popular (recommended by many users) and tested solutions to overcome Windows Update Error 0x80070002. Being one of the most known errors in Windows, its solutions are Comparatively easy to perform. I hope you find this article helpful, and don’t forget to share which method worked for you. Good luck!